Carefully remove the ozone
plate from the card cage by grasping the middle of the edge nearest to you and slowly pull
it straight out.
Clean the plate with hot water and ammonia in a 50/50
solution. You may use a toothbrush if needed, scrubbing gently to avoid fractures. Rinse
with hot water and allow to dry completely. A hair dryer may be used if needed.
MAKE SURE PLATES ARE DRY BEFORE
Reinstall plate gently, making sure that the electrical
tabs are in contact with the plate. Turn on unit to ensure proper placement. If the unit
begins to produce ozone, you have cleaned and installed the plates properly.